E-Bay says that's not a valid item # .
Once you get the leaks fixed it should start a lot easier, any fuel leak is a serious thing here as it allows air to get in .
The black primer is fine, it takes more pumps to fully bleed the system but I always give 40 pumps then rotate the engine 180° and do it again so it'll bleed out and roar back to life fester...
Remember to never let off the throttle until it's running on all five cylinders ~ it's noisy but there's a governor in the IP that prevent it from over speeding and doing any damage .
Mark wrote :
as bad and more pep. Ordered a pair of 14mm wrenches off Ebay
#390207814207 for about $6.50 for the pair, including shipping. If you
are looking for some, there you go. Just need bending. KD Tools is fair
'nuff quality.
Notes: #4 injector seeping fuel, fuel return hoses original, dodgy. Next
step, adjust valves, renew injectors.
Fuel primer pump leaks when it is being used, seems weak and weepy. Will
replace that too. You OK with the Bosch black pumps?
--
Mark L. Bardenwerper, Sr.
Technology...responsibly, thoughtfully
Posted by: vwnate1@yahoo.com
Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (5) |
No comments:
Post a Comment