[diesel_mercedes] Re: alternator bracket replacement

 

If you have to lift the engine then I would change my DIY to LSEDI (Let Someone Else Do It).

--- In diesel_mercedes@yahoogroups.com, "max_stemple" <jasperezra@...> wrote:
>
> Yea, they lift the engine off the bracket to change, thats why it costs so much. Max
>
> --- In diesel_mercedes@yahoogroups.com, "c24052000" <jcrcpa@> wrote:
> >
> > I need the alternator bracket replaced on the 84 300sd. MB quoted 250 part, and 450 labor. The shop that replaced the alternator quoted 250 for the part and I will find out tomorrow how much for labor. Do they have to lift the engine to replace? Anyone done this before and can describe the job for me, and maybe a difficulty scale estimate from 1-5.
> > Performance Products has the part for 154.
> > All opinions welcome.
> >
> > Thanks
> >
> > Chuck
> >
>

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: alternator bracket replacement

 

I would do junkyarddog.com and DIY

Jim

--- In diesel_mercedes@yahoogroups.com, "c24052000" <jcrcpa@...> wrote:
>
> I need the alternator bracket replaced on the 84 300sd. MB quoted 250 part, and 450 labor. The shop that replaced the alternator quoted 250 for the part and I will find out tomorrow how much for labor. Do they have to lift the engine to replace? Anyone done this before and can describe the job for me, and maybe a difficulty scale estimate from 1-5.
> Performance Products has the part for 154.
> All opinions welcome.
>
> Thanks
>
> Chuck
>

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: 83 300SD Aftermarket Radio Removal?

 

PS - feel free to take some really good pictures of each step - and post them in the photo section.
 
brian from la verne, ca
From: CaitlinDean <tinymachine@gmail.com>
To: diesel_mercedes@yahoogroups.com
Sent: Saturday, November 19, 2011 5:34 PM
Subject: [diesel_mercedes] Re: 83 300SD Aftermarket Radio Removal?
 
Thanks Brian...I actually got the radio out with 2 dinner knives and a very helpful SWMBO ;)

Had to take a break until dark and then I was just determined to at least get that hazard out...which I finally did.

My blinkers don't blink, so I'm hoping refurb or replacement of the hazard will fix that, but I figure I might as well clean all the switches.

I'm using the info from http://www.peachparts.com/Wikka/SwitchRefurb but if you or anyone else has tips, I'd love to hear them!

Most of my switches have the icons worn off, so yeah...PAP roadtrip sounds fun...at least I get to practice removing stuff on my own ride first, now I know what to do when I come across some stuff at a PAP.

Tomorrow the hazard gets cleaned...hope it fixes my turn signals and hazard blinking...

Caitlin
Santa Fe

--- In diesel_mercedes@yahoogroups.com, BStromsoe <bstromsoe@...> wrote:
>
> Are you just trying to pop the switch out? If so, there are two metal prongs that keep it seated. Push them in and it lifts out. I clean all my console switches at the same time, so I remove the entire wooden console out (careful, this needs to be researched herein first), and then you can pop all the switches out and clean them, or replace them. Also, dime a dozen at the PAP's. Take a Sunday drive into Colorado or Texas and stop along the way.
>
>  
> brian from la verne, ca
>
>
> ________________________________
> From: CaitlinDean <tinymachine@...>
> To: diesel_mercedes@yahoogroups.com
> Sent: Saturday, November 19, 2011 10:48 AM
> Subject: [diesel_mercedes] 83 300SD Aftermarket Radio Removal?
>
>
>  
> Hi folks, I'm still trying to get to my hazard switch and am stuck at the aftermarket Alpine radio.
>
> I went to Walmart and PepBoys and they both have $15 "kits" but I either just want the cheapo tools themselves OR some nifty thrifty DIY solution.
>
> Someone mentioned hacksaw blades somewhere on the internet...but I don't have those either ;) Without a good visual, I can't picture how these are in there, therefore I can't come up with something on my own.
>
> Any recommendations?
>
> Thanks!
> Caitlin
> Santa Fe
>



__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: 83 300SD Aftermarket Radio Removal?

 

I think that's the same one I used when I first did it. Just remember to do your work on a clean surface, maybe with a white towel because - BB's and small springs will get lost in the rug or any where else the gremlins take them. And use something to cut the greasy crud - but don't light a match or cigarette if it is flammable.
 
brian from la verne, ca
From: CaitlinDean <tinymachine@gmail.com>
To: diesel_mercedes@yahoogroups.com
Sent: Saturday, November 19, 2011 5:34 PM
Subject: [diesel_mercedes] Re: 83 300SD Aftermarket Radio Removal?
 
Thanks Brian...I actually got the radio out with 2 dinner knives and a very helpful SWMBO ;)

Had to take a break until dark and then I was just determined to at least get that hazard out...which I finally did.

My blinkers don't blink, so I'm hoping refurb or replacement of the hazard will fix that, but I figure I might as well clean all the switches.

I'm using the info from http://www.peachparts.com/Wikka/SwitchRefurb but if you or anyone else has tips, I'd love to hear them!

Most of my switches have the icons worn off, so yeah...PAP roadtrip sounds fun...at least I get to practice removing stuff on my own ride first, now I know what to do when I come across some stuff at a PAP.

Tomorrow the hazard gets cleaned...hope it fixes my turn signals and hazard blinking...

Caitlin
Santa Fe

--- In diesel_mercedes@yahoogroups.com, BStromsoe <bstromsoe@...> wrote:
>
> Are you just trying to pop the switch out? If so, there are two metal prongs that keep it seated. Push them in and it lifts out. I clean all my console switches at the same time, so I remove the entire wooden console out (careful, this needs to be researched herein first), and then you can pop all the switches out and clean them, or replace them. Also, dime a dozen at the PAP's. Take a Sunday drive into Colorado or Texas and stop along the way.
>
>  
> brian from la verne, ca
>
>
> ________________________________
> From: CaitlinDean <tinymachine@...>
> To: diesel_mercedes@yahoogroups.com
> Sent: Saturday, November 19, 2011 10:48 AM
> Subject: [diesel_mercedes] 83 300SD Aftermarket Radio Removal?
>
>
>  
> Hi folks, I'm still trying to get to my hazard switch and am stuck at the aftermarket Alpine radio.
>
> I went to Walmart and PepBoys and they both have $15 "kits" but I either just want the cheapo tools themselves OR some nifty thrifty DIY solution.
>
> Someone mentioned hacksaw blades somewhere on the internet...but I don't have those either ;) Without a good visual, I can't picture how these are in there, therefore I can't come up with something on my own.
>
> Any recommendations?
>
> Thanks!
> Caitlin
> Santa Fe
>



__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: 83 300SD Aftermarket Radio Removal?

 

Thanks Brian...I actually got the radio out with 2 dinner knives and a very helpful SWMBO ;)

Had to take a break until dark and then I was just determined to at least get that hazard out...which I finally did.

My blinkers don't blink, so I'm hoping refurb or replacement of the hazard will fix that, but I figure I might as well clean all the switches.

I'm using the info from http://www.peachparts.com/Wikka/SwitchRefurb but if you or anyone else has tips, I'd love to hear them!

Most of my switches have the icons worn off, so yeah...PAP roadtrip sounds fun...at least I get to practice removing stuff on my own ride first, now I know what to do when I come across some stuff at a PAP.

Tomorrow the hazard gets cleaned...hope it fixes my turn signals and hazard blinking...

Caitlin
Santa Fe

--- In diesel_mercedes@yahoogroups.com, BStromsoe <bstromsoe@...> wrote:
>
> Are you just trying to pop the switch out? If so, there are two metal prongs that keep it seated. Push them in and it lifts out. I clean all my console switches at the same time, so I remove the entire wooden console out (careful, this needs to be researched herein first), and then you can pop all the switches out and clean them, or replace them. Also, dime a dozen at the PAP's. Take a Sunday drive into Colorado or Texas and stop along the way.
>
>  
> brian from la verne, ca
>
>
> ________________________________
> From: CaitlinDean <tinymachine@...>
> To: diesel_mercedes@yahoogroups.com
> Sent: Saturday, November 19, 2011 10:48 AM
> Subject: [diesel_mercedes] 83 300SD Aftermarket Radio Removal?
>
>
>  
> Hi folks, I'm still trying to get to my hazard switch and am stuck at the aftermarket Alpine radio.
>
> I went to Walmart and PepBoys and they both have $15 "kits" but I either just want the cheapo tools themselves OR some nifty thrifty DIY solution.
>
> Someone mentioned hacksaw blades somewhere on the internet...but I don't have those either ;) Without a good visual, I can't picture how these are in there, therefore I can't come up with something on my own.
>
> Any recommendations?
>
> Thanks!
> Caitlin
> Santa Fe
>

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: alternator bracket replacement

 

Yea, they lift the engine off the bracket to change, thats why it costs so much. Max

--- In diesel_mercedes@yahoogroups.com, "c24052000" <jcrcpa@...> wrote:
>
> I need the alternator bracket replaced on the 84 300sd. MB quoted 250 part, and 450 labor. The shop that replaced the alternator quoted 250 for the part and I will find out tomorrow how much for labor. Do they have to lift the engine to replace? Anyone done this before and can describe the job for me, and maybe a difficulty scale estimate from 1-5.
> Performance Products has the part for 154.
> All opinions welcome.
>
> Thanks
>
> Chuck
>

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

Re: [diesel_mercedes] 83 300SD Aftermarket Radio Removal?

 

Are you just trying to pop the switch out? If so, there are two metal prongs that keep it seated. Push them in and it lifts out. I clean all my console switches at the same time, so I remove the entire wooden console out (careful, this needs to be researched herein first), and then you can pop all the switches out and clean them, or replace them. Also, dime a dozen at the PAP's. Take a Sunday drive into Colorado or Texas and stop along the way.
 
brian from la verne, ca
From: CaitlinDean <tinymachine@gmail.com>
To: diesel_mercedes@yahoogroups.com
Sent: Saturday, November 19, 2011 10:48 AM
Subject: [diesel_mercedes] 83 300SD Aftermarket Radio Removal?
 
Hi folks, I'm still trying to get to my hazard switch and am stuck at the aftermarket Alpine radio.

I went to Walmart and PepBoys and they both have $15 "kits" but I either just want the cheapo tools themselves OR some nifty thrifty DIY solution.

Someone mentioned hacksaw blades somewhere on the internet...but I don't have those either ;) Without a good visual, I can't picture how these are in there, therefore I can't come up with something on my own.

Any recommendations?

Thanks!
Caitlin
Santa Fe



__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

Re: [diesel_mercedes] alternator bracket replacement

 

Performance Prod is usually at the high end of the Eiffel Tower.
 
brian from la verne, ca
From: c24052000 <jcrcpa@tx.rr.com>
To: diesel_mercedes@yahoogroups.com
Sent: Saturday, November 19, 2011 2:01 PM
Subject: [diesel_mercedes] alternator bracket replacement
 
I need the alternator bracket replaced on the 84 300sd. MB quoted 250 part, and 450 labor. The shop that replaced the alternator quoted 250 for the part and I will find out tomorrow how much for labor. Do they have to lift the engine to replace? Anyone done this before and can describe the job for me, and maybe a difficulty scale estimate from 1-5.
Performance Products has the part for 154.
All opinions welcome.

Thanks

Chuck



__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

Re: [diesel_mercedes] Mazatlan

 

What about those tiny bikinis you spoke of?  No photos??
 
From: Lost but making good time. <aldridgetony97@yahoo.com>
To: diesel_mercedes@yahoogroups.com
Sent: Saturday, November 19, 2011 5:29 PM
Subject: [diesel_mercedes] Mazatlan

 
Some more pics of Mazatlan, there is always something going on here. SWMBO is off on a day trip with some friends, I am guarding the fort.
http://www.flickr.com/photos/technicotony/sets/72157628055875287/show/



__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Mazatlan

 

Some more pics of Mazatlan, there is always something going on here. SWMBO is off on a day trip with some friends, I am guarding the fort.
http://www.flickr.com/photos/technicotony/sets/72157628055875287/show/

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] alternator bracket replacement

 

I need the alternator bracket replaced on the 84 300sd. MB quoted 250 part, and 450 labor. The shop that replaced the alternator quoted 250 for the part and I will find out tomorrow how much for labor. Do they have to lift the engine to replace? Anyone done this before and can describe the job for me, and maybe a difficulty scale estimate from 1-5.
Performance Products has the part for 154.
All opinions welcome.

Thanks

Chuck

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] 83 300SD Aftermarket Radio Removal?

 

Hi folks, I'm still trying to get to my hazard switch and am stuck at the aftermarket Alpine radio.

I went to Walmart and PepBoys and they both have $15 "kits" but I either just want the cheapo tools themselves OR some nifty thrifty DIY solution.

Someone mentioned hacksaw blades somewhere on the internet...but I don't have those either ;) Without a good visual, I can't picture how these are in there, therefore I can't come up with something on my own.

Any recommendations?

Thanks!
Caitlin
Santa Fe

__._,_.___
Recent Activity:
MARKETPLACE

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:
Subscribe to: Posts (Atom)