Diesel RVs: November 2015

Exploded parts pictures. Bill

From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com]
Sent: Monday, November 30, 2015 5:18 PM
To: diesel_mercedes@yahoogroups.com
Subject: RE: [diesel_mercedes] W110 200D rear axle removal

Well, it’s the image before the one that pops up. Bill

From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com]
Sent: Monday, November 30, 2015 4:55 PM
To: diesel_mercedes@yahoogroups.com
Subject: RE: [diesel_mercedes] W110 200D rear axle removal

A question about the 5^th image, IMG_20151129_170935.

I see two (castellated) nuts, and there are probably two on the other side. What are they holding on? Bill in Oregon

__._,_.___

Posted by: <corvallis@peoplepc.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (9)

Check out the automatic photo album with 7 photo(s) from this topic.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

RE: [diesel_mercedes] W110 200D rear axle removal

Well, it’s the image before the one that pops up. Bill

A question about the 5^th image, IMG_20151129_170935.

I see two (castellated) nuts, and there are probably two on the other side. What are they holding on? Bill in Oregon

__._,_.___

Posted by: <corvallis@peoplepc.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (8)

Check out the automatic photo album with 7 photo(s) from this topic.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

RE: [diesel_mercedes] W110 200D rear axle removal

A question about the 5^th image, IMG_20151129_170935.

I see two (castellated) nuts, and there are probably two on the other side. What are they holding on? Bill in Oregon

__._,_.___

Posted by: <corvallis@peoplepc.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (7)

Check out the automatic photo album with 7 photo(s) from this topic.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

Re: [diesel_mercedes] W110 200D rear axle removal

Thank you Max.

Dexter

On Monday, November 30, 2015 11:55 AM, "Max temple jasperezra@gmail.com [diesel_mercedes]" <diesel_mercedes@yahoogroups.com> wrote:

I have a old Glenns out in the shop somewheres. I'll try and find it. I am glad I never had to take apart the rear end on my 59. Max

On Mon, Nov 30, 2015 at 5:50 AM, vwnate1@yahoo.com [diesel_mercedes] <diesel_mercedes@yahoogroups.com> wrote:

Dexter ;

If there's no nut on the axle's flange then there has to be an inner clip or pin....

No old Glenn's manual or anything to look at ? .

Maybe the exploded parts diagrams in either the EPC or the English Partshaus Bill often posts about ? .

This is a first water mystery .

I'm wondering how you managed to post a photo in the middle of the message ! .

-Nate
Dexter wrote :

We are trying to remove the rear axle to get the rear outer bearings. We have used a slide hammer and a tool we made that mounts on the wheel and have been pulling pretty hard but can't get anything to move. All the pictures and diagrams I have looked at show no C-Clip on the end of the axle in the differential that we have to remove, and the differential doesn't split in half to easily get inside. There is a big whole that seems to be an access hole to remove these nuts that supposedly holds in a plate, and that plate holds in the axle instead. We took all those off but no luck. I took some pictures, and the one on the back of the wheel there seems to be a bolt or nut that I highlighted and I am thinking that might be holding it in. Any ideas?

__._,_.___

Posted by: Dexter Barney <dexterbarney437@yahoo.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (6)

Check out the automatic photo album with 7 photo(s) from this topic.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

Re: [diesel_mercedes] W110 200D rear axle removal

I have a old Glenns out in the shop somewheres. I'll try and find it. I am glad I never had to take apart the rear end on my 59. Max

On Mon, Nov 30, 2015 at 5:50 AM, vwnate1@yahoo.com [diesel_mercedes] <diesel_mercedes@yahoogroups.com> wrote:

Dexter ;

If there's no nut on the axle's flange then there has to be an inner clip or pin....

No old Glenn's manual or anything to look at ? .

Maybe the exploded parts diagrams in either the EPC or the English Partshaus Bill often posts about ? .

This is a first water mystery .

I'm wondering how you managed to post a photo in the middle of the message ! .

-Nate
Dexter wrote :

We are trying to remove the rear axle to get the rear outer bearings. We have used a slide hammer and a tool we made that mounts on the wheel and have been pulling pretty hard but can't get anything to move. All the pictures and diagrams I have looked at show no C-Clip on the end of the axle in the differential that we have to remove, and the differential doesn't split in half to easily get inside. There is a big whole that seems to be an access hole to remove these nuts that supposedly holds in a plate, and that plate holds in the axle instead. We took all those off but no luck. I took some pictures, and the one on the back of the wheel there seems to be a bolt or nut that I highlighted and I am thinking that might be holding it in. Any ideas?