Thank you Bill.
I did a search and came up with this; look down the column at the right:
https://www.youtube.com/watch?v=p5hzyFMbAdk
Someone here will have better advice. Bill in Oregon
From: diesel_mercedes@yahoogroups.com [mailto: diesel_mercedes@yahoogroups.com ]
Sent: Wednesday, November 25, 2015 6:02 PM
To: yahoogroups
Subject: [diesel_mercedes] W110 removing rear axle
67 200d
My dad and I are trying to remove the axle. After looking around on the web its common to have a small plate or access panel on the differential that you open up, push in the axle, and then remove a c clamp on the end. This allows you to just pull it off. However ours doesn't have that access panel, and with further research there are some without the clips on the end, which is what mine appears to be. In my case you use an access hole one the end of the wheel that allows you to screw off nuts and pull the axle out with a slide hammer. When we tried the slide hammer we couldn't get it to move at all.
Posted by: Dexter Barney <dexterbarney437@yahoo.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (3) |
