Re: [diesel_mercedes] URO Brand W123 Blower

 

I had the same experience when I replaced my aging genuine Mercedes unit with the URO replacement instead of replacing the brushes.  The new motor drew fewer amps and pushed a lot more air.  However, the URO motor has a higher pitched whine that the old unit didn't have, so it's a bit more noticeable.  Me, though, I'm enjoying the heat.

--Conrad J.

On Thu, Nov 26, 2020 at 5:13 PM Nate vwnate1@yahoo.com [diesel_mercedes] <diesel_mercedes@yahoogroups.com> wrote:
 


O.K., I've been driving with this new blower in heat and cold and the best thing is : it passes far more air volume so I can leave it on the lowest setting and still get plenty of heat or cold air .

I hope everyone here has a nice Holiday .

-Nate
LIVE in the world as it is, WORK to make the world as it should be

__._,_.___
Posted by: Conrad Jacoby <conrad.jacoby@gmail.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (2)

.

__,_._,___
No comments:

[diesel_mercedes] URO Brand W123 Blower

 


O.K., I've been driving with this new blower in heat and cold and the best thing is : it passes far more air volume so I can leave it on the lowest setting and still get plenty of heat or cold air .

I hope everyone here has a nice Holiday .

-Nate
LIVE in the world as it is, WORK to make the world as it should be

__._,_.___
Posted by: Nate <vwnate1@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
No comments:

[diesel_mercedes] Re: [dieselMercedes] LED Fog Lamps & 'Uro' Brand W123 HVAC Blower Motor

 


Well and good Bud ~

We're not supposed to go where there are others so the back yard or garage is good for exercise metal and physical...

To - day's job was my 2000 Ford Ranger pickup, I've been up dating little things bit by bit and wanted to add a passenger side assist handle, it turns out I had to take 1/2 the interior apart to do this simple thing so I took the time to really clean the sugar sand that got into ever crevice when I was in Death Valley....

I love rubber floor mats ! After vacuuming them I cleaned then with a toothbrush and Meguiar's #40, I even cleaned under the seats and so on...

Updated the rear cab lamp to a loading lamp as well as brake light, switched to LED's, wow what an improvement .

Always something to do .

FWIW, the Uro blower motor really works well ~ I keep it on the low setting and it's silent and blows quite a bit more air volume than the old one with new brushes ever did .

The headlights are noticeably brighter too ~ when you're in your 7th decade night driving isn't a fun thing like it was in my 20's ~ I can really notice the better view, still using standard # 6014 7" seal beams .

Take baby steps and do the little things, it makes the car more enjoyable and keep the interest in tinkering going .

-Nate
LIVE in the world as it is, WORK to make the world as it should be


                                 Bud  wrote:


Nate, you're inspiring me to get back to work on my 300SD!  

On Tue, Nov 24, 2020, 8:21 AM Nate via groups.io <VWNate1=yahoo.com@groups.io> wrote:
Hi all ;

We're getting close to the end here, I hope everyone is getting ready to have a NICE & SAFE Thanksgiving .


I replaced the original BOCSH H4 fog lamp bulbs with some yellow Chinese ones, they look great in spite of the faded yellow lenses and draw less current to, a win-win in my book .

I also installed a new Uro brand HVAC motor, it has far less drag on it and draws less current, it's quieter and blows more air at lower speeds too, maybe this is better than the time consuming replacement of old worn out brushes, to do that job properly you need to take the motor all the way apart and clean all the accumulated dust out and lubricate the bronze bushings...

Some years back I tried a Uro blower and didn't like it, this one is a slightly improved design I think will be the easy and co$t effective answer most are looking for .

Winter is almost upon us ,  look at this now and don't forget to fully flush the coolant out and add new using only DISTILLED water or the proper G5 pre mix yellow coolant .

I'm "Yankee Thrifty" (cheap) so I get the undiluted stuff @ O'Reily's, they have it in the back, you have to ask for it .

-Nate
LIVE in the world as it is, WORK to make the world as it should be

--
-Nate

Older but apparently no wiser
_._,_._,_
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#206) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [VWNate1@yahoo.com]

_._,_._,_

__._,_.___
Posted by: Nate <vwnate1@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)

.

__,_._,___
No comments:
Subscribe to: Posts (Atom)