[diesel_mercedes] Re: 240D will not shut off

 



or someone took the vacuum canister off of the top of the injector pump for some reason and never put it back right. look very carefully at how the linkages in there engage and put it back right(which looked wrong for me when i took off mine on a 617 engine). if it engages wrongly, the stop lever does not go down far enough to cut off fuel supply to the IP.

mike

--- In diesel_mercedes@yahoogroups.com, John Mutch <tokens@...> wrote:
>
> Troubleshoot the vacuum system with a MyteeVac. It has a leak.
> John
>
>
> On Fri, May 10, 2013 at 7:18 PM, waxhawdon <waxhawdon@...> wrote:
>
> > **
> >
> >
> > New member here. I just bought a sweet running '77 240D.
> > It starts and runs great but will not shut off with the key.
> > Any ideas?
> >
> >
> >
>
>
>
> --
> *****************************************************************
> President - Token and Medal Society <http://www.tokenandmedal.org>
> "Permanent" e-mail address: tokens@...
> *****************************************************************
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re: antenna motor Test

 



Hi. About that stuck antenna, have a look at this video. might be able to help you sort it out.
http://www.youtube.com/watch?v=tanEyXBVhUk

Mike

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (11)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re: Sylvia - 1984 300 SD - bad alternator makes her go wonky....

 

I have had excellent luck with the alternator sold by fattywagons, near the bottom of this page:

http://fattywagon.com/fwproducts.htm

but then swap out the voltage regulator with one of these:

http://www.davebarton.com/AdjustableVoltage.html

Since the fattywagon pulleys are smaller than stock, you have to go down one length size on your belt(s).

This rig works great.

I have also bought a high capacity alternator from a random seller on ebay (with excellent feedback rating), that uses a standard pulley size, and it works good with one of Dave's adjustable voltage regulators. About half the price of the fattywagon rig.

It is really hard to figure out what size you need, the two sizes are so close in appearance, even measuring them is difficult. So ask the seller what size the regulators are before you buy. And don't buy unless they are sure.

Jim

--- In diesel_mercedes@yahoogroups.com, "Barton C. Fiske" <barton.fiske@...> wrote:
>
> Replacement was $300 installed…
>
> -Barton
>
>
> Set the Controls for the Heart of the Sun
>
> Barton C. Fiske
> barton.fiske@...
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (6)
Recent Activity:
.

__,_._,___
No comments:
Subscribe to: Posts (Atom)