Re: [diesel_mercedes] W110 200D rear axle removal

 

Hey Dexter, if you want this Mercedes Glens manual, send me a address. I believe in paying it forward. It will be my Christmas present to you. Its on the table waiting. Just the pictures of old Mercedes in it are worth having it.  Max

On Fri, Dec 4, 2015 at 12:07 PM, vwnate1@yahoo.com [diesel_mercedes] <diesel_mercedes@yahoogroups.com> wrote:




I didn't see any castellated nuts but I did see six 8 MM studs , those are used to attach the brake plate to the axle banjo housing .

-Nate
    Bill   wrote :

Well, it's the image before the one that pops up.  Bill

From: diesel_mercedes@yahoogroups.com [mailto: diesel_mercedes@yahoogroups.com ]
Sent: Monday, November 30, 2015 4:55 PM
To: diesel_mercedes@yahoogroups.com
Subject: RE: [diesel_mercedes] W110 200D rear axle removal

 

A question about the 5th image, IMG_20151129_170935.

I see two (castellated) nuts, and there are probably two on the other side. What are they holding on?  Bill in Oregon




__._,_.___
Posted by: Max temple <jasperezra@gmail.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (12)
Check out the automatic photo album with 7 photo(s) from this topic.
IMG_20151129_170858.jpg IMG_20151129_170955 highlight.jpg IMG_20151129_170841.jpg IMG_20151129_170935.jpg IMG_20151129_171013.jpg

.

__,_._,___
No comments:

[diesel_mercedes] Routine Service

 

'84 300CD , routine oil and filter change , replaced the clear plastic fuel intake screen because I realized I'd installed it backwards the last time ~ it was clear as is proper but for $4 I'll just toss the old one out .

It's beginning to cool off here (some 40* F nights) so I decided to figure out why the heater stopped working when Victor installed my SANDEN AC compressor last Summer .

So far I have discovered that getting heat is simple : just gently wiggle and unplug the monovalve , it'll pop open , providing you with generous heat .

I also tested the auxiliary hot water pump , it works a treat , next will be fuses and then the dash control unit .

Should be simple , just takes time to look at things .

-Nate


__._,_.___
Posted by: vwnate1@yahoo.com
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (50)
Check out the automatic photo album with 1 photo(s) from this topic.
IMG_1130[1].JPG

.

__,_._,___
No comments:

RE: [diesel_mercedes] W110 200D rear axle removal

 



I didn't see any castellated nuts but I did see six 8 MM studs , those are used to attach the brake plate to the axle banjo housing .

-Nate
    Bill   wrote :

Well, it's the image before the one that pops up.  Bill

From: diesel_mercedes@yahoogroups.com [mailto: diesel_mercedes@yahoogroups.com ]
Sent: Monday, November 30, 2015 4:55 PM
To: diesel_mercedes@yahoogroups.com
Subject: RE: [diesel_mercedes] W110 200D rear axle removal

 

A question about the 5th image, IMG_20151129_170935.

I see two (castellated) nuts, and there are probably two on the other side. What are they holding on?  Bill in Oregon

__._,_.___
Posted by: vwnate1@yahoo.com
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (11)
Check out the automatic photo album with 7 photo(s) from this topic.
IMG_20151129_170858.jpg IMG_20151129_170955 highlight.jpg IMG_20151129_170841.jpg IMG_20151129_170935.jpg IMG_20151129_171013.jpg

.

__,_._,___
No comments:
Subscribe to: Posts (Atom)