[diesel_mercedes] Re: ? MAX ?

 

I see him on another site in the last few days. He has much snow and very cold weather. Tried phoning him a few days ago & hit an answering machine.
Tony

--- In diesel_mercedes@yahoogroups.com, john public wrote:
>
> i was kinda wonderin' myself, but don't know him personally enuf to really ask....As an aside, Ive noticed over the last few winters that the hard starting questions have dropped off, suggesting that maybe some of the users are dropping out of the group.
>
> --- On Sun, 1/13/13, Nate wrote:
>
> From: Nate
> Subject: [diesel_mercedes] ? MAX ?
> To: diesel_mercedes@yahoogroups.com
> Date: Sunday, January 13, 2013, 3:45 PM
>
>
> Are you out there still ? .
>
> -Nate
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] ? MAX ?

 

i was kinda wonderin' myself, but don't know him personally enuf to really ask....As an aside, Ive noticed over the last few winters that the hard starting questions have dropped off, suggesting that maybe some of the users are dropping out of the group.

--- On Sun, 1/13/13, Nate <vwnate1@yahoo.com> wrote:

From: Nate <vwnate1@yahoo.com>
Subject: [diesel_mercedes] ? MAX ?
To: diesel_mercedes@yahoogroups.com
Date: Sunday, January 13, 2013, 3:45 PM


Are you out there still ? .

-Nate



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/diesel_mercedes/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/diesel_mercedes/join
    (Yahoo! ID required)

<*> To change settings via email:
    diesel_mercedes-digest@yahoogroups.com
    diesel_mercedes-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    diesel_mercedes-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: Surging at Idle

 

Thanks, I've done a valve adj. fairly recently and filters are good and fuel dosed regularly.

On Sun, Jan 13, 2013 at 3:33 PM, Nate <vwnate1@yahoo.com> wrote:
 


It's the rack damper bolt , at the dead rear of the IP ~ it has a 14MM locknut and a 12 MM head (IIRC) , you loosen the locknut then turn the bolt proper gently and _s l o w l y_ as the engine idles , I usually turn it in a bit , too far and the engine will begin ti run rough .

Of course , this shouldn't be touched until after you've adjusted the valves , done a Diesel P{urge and changed both fuel filters , it's a wa$te of time otherwise .

-Nate
Alan wrote :
>
> Some one on this list mentioned an adjustment on the injection pump to cure
> surging at idle. (at least we've got an idle) How and what do I adjust?
> Thanks
> Al Boucher
>


__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] ? MAX ?

 
__,_._,___
No comments:

[diesel_mercedes] Re: 87 300 TD Front strut replacement

 


For safety reasons , I only suggest you get a coil spring compressor ,
they're cheap at Harbor Freight .

Using a hydraulic trolley jack works on some cars , others not so much and I knew a VW Mechanic who was bisected by a Super Beetle Spring he decided to dis respect ~ it went in his stomach and splattered his spine (and other wet bits) all over the shop wall behind him .

-Nate
Bill wrote :
>
> Maybe Nate (in Calif.) will respond to this.
>
> I've heard of "quick struts" being offered by the FLAPS. They are the whole
> strut and spring in one unit; you give them your old one. Do they exist for
> the Mercedes?
>
> Bill in Oregon
>
>
>
> _____
>
> From: diesel_mercedes@yahoogroups.com
> [mailto:diesel_mercedes@yahoogroups.com] On Behalf Of rmh3_98
> Sent: Saturday, January 12, 2013 8:38 PM
> To: diesel_mercedes@yahoogroups.com
> Subject: [diesel_mercedes] 87 300 TD Front strut replacement
>
>
>
> Anyone attempted this?
>
> With or without a spring compression tool?
>
> Giving thought to trying this using jack stands and a floor jack.
>
> Thanks,
> Rusty
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re: Surging at Idle

 


It's the rack damper bolt , at the dead rear of the IP ~ it has a 14MM locknut and a 12 MM head (IIRC) , you loosen the locknut then turn the bolt proper gently and _s l o w l y_ as the engine idles , I usually turn it in a bit , too far and the engine will begin ti run rough .

Of course , this shouldn't be touched until after you've adjusted the valves , done a Diesel P{urge and changed both fuel filters , it's a wa$te of time otherwise .

-Nate
Alan wrote :
>
> Some one on this list mentioned an adjustment on the injection pump to cure
> surging at idle. (at least we've got an idle) How and what do I adjust?
> Thanks
> Al Boucher
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (3)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re : Block Heater

 


I hear you Nate ! .

It was rainy , muddy , cold , greasy under the hood and I didn't have the 46 MM (?) socket necessary to remove it .

-Nate
Nate R. wrote :
>
> thats a shame I could use a heater to heat the block so heater won't take 10 minutes to come on
>  
>
> Tennessee Nate
>
>
> ________________________________
> From: Nate
> To: diesel_mercedes@yahoogroups.com
> Sent: Friday, January 11, 2013 2:00 PM
> Subject: [diesel_mercedes] Pi$$ed Off
>
>
>  
>
>
> Tom and I were in a Pick-A-Part the other day and stumbled across a '85 300D with factory fitted block heater ~ just the thing for the hard core Diesel Head (ahem) . sadly some boob had taken the turbo and manifolds complete , although this makes for super easy accesss , the boob had used a sawsall cut right through the various brackets supports , POWER CORD and so on......
>
> Grumble .
>
> -Nate
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (4)
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re: Surging at Idle

 

If it's a W123 maybe you need this part - 1420560014 - upgrade from original.

Jim

--- In diesel_mercedes@yahoogroups.com, Alan Boucher wrote:
>
> Some one on this list mentioned an adjustment on the injection pump to cure
> surging at idle. (at least we've got an idle) How and what do I adjust?
> Thanks
> Al Boucher
>

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
.

__,_._,___
No comments:

RE: [diesel_mercedes] 87 300 TD Front strut replacement

 

Maybe Nate (in Calif.) will respond to this.

I’ve heard of “quick struts” being offered by the FLAPS. They are the whole strut and spring in one unit; you give them your old one. Do they exist for the Mercedes?

Bill in Oregon

 

From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com] On Behalf Of rmh3_98
Sent: Saturday, January 12, 2013 8:38 PM
To: diesel_mercedes@yahoogroups.com
Subject: [diesel_mercedes] 87 300 TD Front strut replacement

 

Anyone attempted this?

With or without a spring compression tool?

Giving thought to trying this using jack stands and a floor jack.

Thanks,
Rusty

__._,_.___
Reply via web post Reply to sender Reply to group Start a New Topic Messages in this topic (2)
Recent Activity:
.

__,_._,___
No comments:
Subscribe to: Posts (Atom)