[diesel_mercedes] Re: Hard starting black puff when starting

 

Re: Hard starting black puff when starting
    Posted by: "Nate" vwnate1@yahoo.com vwnate1
    Date: Fri Feb 25, 2011 1:16 pm ((PST))

"Do you need one of these 6 point black connectors Lawrence ? ."

I need the small one. Four hot pins.   It is the pin cover for the heat sensor
connector in the Relay Box.  I'm getting my new relay Monday.  I don't see what
else it could be.  One line in for +.  Eight lines out for sense & glowplugs. 
Not rocket science.  It's got to be the relay.  All the Glow plugs are good
according to resistance.  Hmmmm.  I wonder though what the behavior is when the
sensors go bad??????  Lawrence Rhodes....

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Gonna hit a Las Vegas PAP tomorrow.

 

Hope Nate hasn't cleaned out all the good stuff. Would like to pick up a spare Vac pump, a mono Valve, & some other goodies. They say it is gonna rain tomorrow, so will have to dig out my rain gear. Gonna go to the PAP on smiley rd unless anyone knows of a better one.
Cheers, Tony.

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] PAP request

 

I see the 9 blades laying on the ground every now and then, and sometimes in the engine. My take - don't bother with such old plastic. Spend some money on new ones from autohaus or comparable, or scout for a newly replaced fan. Otherwise it is like the window washer jug - old plastic.
 
brian from la verne, ca


From: bgiovan <bgiovan@cavtel.net>
To: diesel_mercedes@yahoogroups.com
Sent: Thu, February 24, 2011 5:09:23 PM
Subject: [diesel_mercedes] PAP request

 

If anyone makes it out can you keep an eye out for a 1984/1985 300D or 300SD. Looking for the 9 blade plastic fan and the pulley, etc. Been reading how it really helps cool down the pre 1983 OM617s.

Official part numbers:

Pully: 617 205 09 10
Clutch: 000 200 19 22
Fan (9-blade): 110 200 03 23
Bolts (To mount the new fan.) (18x15 vs. 8x18) 000933 008131
Washer: 000433 008406

Thanks!

Ben near Detroit.


__._,_.___
Recent Activity:
.

__,_._,___
No comments:

RE: [diesel_mercedes] Fuel price sticker shock

 

I over–did my winter bio blend rule of 50/50 and accidentally went B70 in the Suburban today.  Noticed some gelling sluggishness on the way home from work but 1.5 bottles of Diesel 911 later – all good.  Supposed to hit 50F by Monday so soon, baby soon…back to B100.

 

Ben near Detroit.

 

From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com] On Behalf Of brian's 83 300d's
Sent: Friday, February 25, 2011 6:32 PM
To: diesel_mercedes@yahoogroups.com
Subject: [diesel_mercedes] Fuel price sticker shock

 

 

$4 / gallon. Happy to pay more to get rid of turban head, but it will take some getting used to.

brian from laverne

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Fuel price sticker shock

 

$4 / gallon. Happy to pay more to get rid of turban head, but it will take some getting used to.

brian from laverne

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: PAP request

 

tccservice111@yahoo.com

--- On Fri, 2/25/11, bgiovan@cavtel.net <bgiovan@cavtel.net> wrote:

From: bgiovan@cavtel.net <bgiovan@cavtel.net>
Subject: Re: [diesel_mercedes] Re: PAP request
To: diesel_mercedes@yahoogroups.com
Date: Friday, February 25, 2011, 3:46 PM

 
Great TN Nate, thanks! I'll ping ya offline. If you have something
you're looking for let me know...I might just have it.

Ben near Detroit.

On 2/25/2011 4:35 PM, Nate Rector wrote:
>
> I have one you can have good shape,will need clutch.
>
> --- On *Fri, 2/25/11, Nate /<vwnate1@yahoo.com>/* wrote:
>
>
> From: Nate <vwnate1@yahoo.com>
> Subject: [diesel_mercedes] Re: PAP request
> To: diesel_mercedes@yahoogroups.com
> Date: Friday, February 25, 2011, 3:22 PM
>
>
> According to Performance Parts , you can simply bolt it onto your
> older engine , OM616/617....
>
> Most out here are beginning to crunble from the SMOG .
>
> Last time I looked OnLine , they weren't terribly expen$ive new .
>
> -Nate
> Ben wrote:
> >
> > If anyone makes it out can you keep an eye out for a 1984/1985
> 300D or 300SD. Looking for the 9 blade plastic fan and the pulley,
> etc. Been reading how it really helps cool down the pre 1983 OM617s.
> >
> > Official part numbers:
> >
> > Pully: 617 205 09 10
> > Clutch: 000 200 19 22
> > Fan (9-blade): 110 200 03 23
> > Bolts (To mount the new fan.) (18x15 vs. 8x18) 000933 008131
> > Washer: 000433 008406
> >
> > Thanks!
> >
> > Ben near Detroit.
> >
>
>
>

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: PAP request

 

Great TN Nate, thanks! I'll ping ya offline. If you have something
you're looking for let me know...I might just have it.

Ben near Detroit.

On 2/25/2011 4:35 PM, Nate Rector wrote:
>
> I have one you can have good shape,will need clutch.
>
> --- On *Fri, 2/25/11, Nate /<vwnate1@yahoo.com>/* wrote:
>
>
> From: Nate <vwnate1@yahoo.com>
> Subject: [diesel_mercedes] Re: PAP request
> To: diesel_mercedes@yahoogroups.com
> Date: Friday, February 25, 2011, 3:22 PM
>
>
> According to Performance Parts , you can simply bolt it onto your
> older engine , OM616/617....
>
> Most out here are beginning to crunble from the SMOG .
>
> Last time I looked OnLine , they weren't terribly expen$ive new .
>
> -Nate
> Ben wrote:
> >
> > If anyone makes it out can you keep an eye out for a 1984/1985
> 300D or 300SD. Looking for the 9 blade plastic fan and the pulley,
> etc. Been reading how it really helps cool down the pre 1983 OM617s.
> >
> > Official part numbers:
> >
> > Pully: 617 205 09 10
> > Clutch: 000 200 19 22
> > Fan (9-blade): 110 200 03 23
> > Bolts (To mount the new fan.) (18x15 vs. 8x18) 000933 008131
> > Washer: 000433 008406
> >
> > Thanks!
> >
> > Ben near Detroit.
> >
>
>
>

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: PAP request

 

I have one you can have good shape,will need clutch.

--- On Fri, 2/25/11, Nate <vwnate1@yahoo.com> wrote:

From: Nate <vwnate1@yahoo.com>
Subject: [diesel_mercedes] Re: PAP request
To: diesel_mercedes@yahoogroups.com
Date: Friday, February 25, 2011, 3:22 PM

 

According to Performance Parts , you can simply bolt it onto your older engine , OM616/617....

Most out here are beginning to crunble from the SMOG .

Last time I looked OnLine , they weren't terribly expen$ive new .

-Nate
Ben wrote:
>
> If anyone makes it out can you keep an eye out for a 1984/1985 300D or 300SD. Looking for the 9 blade plastic fan and the pulley, etc. Been reading how it really helps cool down the pre 1983 OM617s.
>
> Official part numbers:
>
> Pully: 617 205 09 10
> Clutch: 000 200 19 22
> Fan (9-blade): 110 200 03 23
> Bolts (To mount the new fan.) (18x15 vs. 8x18) 000933 008131
> Washer: 000433 008406
>
> Thanks!
>
> Ben near Detroit.
>


__._,_.___
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Snobby Car Owners

 


Take some solace in the knowledge that they don't actually _like_ the cars, they're compensating for small penis'.....

-Nate

__._,_.___
Recent Activity:
MARKETPLACE

Get great advice about dogs and cats. Visit the Dog & Cat Answers Center.

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: hood emblem ?

 


If you're talking about the Star , ETY Parts in Eagle Rock , Ca has the re pops for $30 but I bought my original one from The Classic Center , better quality hands down , fits right etc, etc. .

It's the whole thing , not just the start part , easy to change out with slip joint pliers in 60 seconds or less .

-Nate
Nick Asked :
>
> Where can I get a 1984 hood ornament for my 1984 mercedes 300D
>
> Hoping to pay around 30. saw on online but can not remember where.
>
> thanks, Nick
>

__._,_.___
Recent Activity:
MARKETPLACE

Get great advice about dogs and cats. Visit the Dog & Cat Answers Center.

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: PAP request

 


According to Performance Parts , you can simply bolt it onto your older engine , OM616/617....

Most out here are beginning to crunble from the SMOG .

Last time I looked OnLine , they weren't terribly expen$ive new .

-Nate
Ben wrote:
>
> If anyone makes it out can you keep an eye out for a 1984/1985 300D or 300SD. Looking for the 9 blade plastic fan and the pulley, etc. Been reading how it really helps cool down the pre 1983 OM617s.
>
> Official part numbers:
>
> Pully: 617 205 09 10
> Clutch: 000 200 19 22
> Fan (9-blade): 110 200 03 23
> Bolts (To mount the new fan.) (18x15 vs. 8x18) 000933 008131
> Washer: 000433 008406
>
> Thanks!
>
> Ben near Detroit.
>

__._,_.___
Recent Activity:
MARKETPLACE

Find useful articles and helpful tips on living with Fibromyalgia. Visit the Fibromyalgia Zone today!

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Dammit Max !

 



I told you to stop torturing me ! =8-) .

-Nate
Max Wrote :

Nope b models are gas. The only diesels are D models. My car had no rust
anywhere. Max

__._,_.___
Recent Activity:
MARKETPLACE

Find useful articles and helpful tips on living with Fibromyalgia. Visit the Fibromyalgia Zone today!

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

.

__,_._,___
No comments:

[diesel_mercedes] Re: Hard starting black puff when starting

 


Do you need one of these 6 point black connectors Lawrence ? .

I see them from time to time , they're fairly delicate , I broke one when converting my U.S. Spec. car to Euro. headlights as that requires them too .

-Nate
Lawrence wrote:
>
>

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

Re: [diesel_mercedes] Re: MB- Now I'm crying... Q for max

 

Max,
I know what you mean; i tried to join the jag owners group...no such luck...guess my blood isn't blue enuf.

--- On Fri, 2/25/11, max_stemple <max_stemple@yahoo.com> wrote:

> From: max_stemple <max_stemple@yahoo.com>
> Subject: [diesel_mercedes] Re: MB- Now I'm crying... Q for max
> To: diesel_mercedes@yahoogroups.com
> Date: Friday, February 25, 2011, 3:07 PM
>
> Yea, I think there was a Dc model too. They had tiny little
> differences, like knobs or switches on the dash. The most
> notable difference was the Db model had strange tail light
> lenses. You know there is a Ponton group on Yahoo, if anyone
> is interested they could check that out. Mostly they are
> into the gassers. I used to be there but then I found this
> group. This group is way more "earthly" or not "snobby". I
> hope that came out right. Max
> --- In diesel_mercedes@yahoogroups.com,
> Aleph93 <aleph93@...> wrote:
> >
> > Some of the early models added "b" on the end, after
> "D"
> > 1950-53 - 170Db
> > 1958-61 -190Db
> >
> > Rob
> > Garden Grove, CA
> > I put together this little list:
> > http://home.roadrunner.com/~ocveggiecar/MBs.html
> > ====
> >
> > On 2/25/11 1:18 AM, diesel_mercedes@yahoogroups.com
> wrote:
> > >   Re: MB- Now I'm crying... Q for
> max
> > >      Posted by:
> "max_stemple"max_stemple@...  max_stemple
> > >      Date: Thu Feb 24, 2011 8:40
> am ((PST))
> > >
> > >
> > > Nope b models are gas. The only diesels are D
> models. My car had no rust anywhere. Max
> > > --- Indiesel_mercedes@yahoogroups.com,
> john public<brad_macaboy1234@>  wrote:
> > >> >
> > >> >  Max,
> > >> >  do you know if the 190b model was
> a diesel? Also, did you encounter any rust problems in the
> rear suspension; if so how difficult to repair?
> > >> > 
> > >> >  -
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>     diesel_mercedes-fullfeatured@yahoogroups.com
>
>
>

__._,_.___
Recent Activity:
.

__,_._,___
No comments:

[diesel_mercedes] Re: W-111 Mercedes Coupe On FLEA-BAY !

 


I wondered about that too but as it has 2010 tags , it's prolly not terribly rusty  just the typical neglect so common to older vehicles here in So. Cal. ~ run 'em 'till the drop then scrap 'em out , luckily they now have the Charity Auctions so not as many good oldies get scrapped .
 
A couple years ago before I went crasahing over the Diesel Power cliff , I was searching high & low for a W-111 Coupe , _any_  W-111 Coupe , I would have been shickled titless to find this FOUR SPEED car......
 
What kinda '68 Dodge Pee-Cup ? a A-110 ? D-100 ? W-200 (Power Wagon , SWEET !)
 
-Nate
      Rrobert  wrote:
 oh I like those cars so much!!!

Wonder how much rust there is under the carpets?

Too bad I blew my spending money on a '68 Dodge truck recently or I would be all over this.

_
 
 

__._,_.___
Recent Activity:
.

__,_._,___
No comments:
Subscribe to: Posts (Atom)