This is ON TOPIC as I don't want my Mercedes parts to get wet ! .
THANK YOU for the info , I have been reading around on it and it looks like a PVC roof in white is what I want....
Now to find someone in L.A. who can do the job .
-Nate
Chuck wrote:
>
> I went to this link:
> http://www.askthebuilder.com/B200_Membrane_Roofing_Types.shtml
>
> Take the roofer to your computer and show him the data. Hopefully he will fix it.
> Chuck
>
> This is what I found. All new to me.
>
> There are three major types of flexible roofing membranes. All of them are fairly complex and some have names that you can barely pronounce. I happen to like the products in the first group - those being the Thermoset types.
>
> Thermoset Membranes
>
> These materials are ones that chemically crosslink. What that means to you is that once seams cure you have one giant molecule of roofing over your head and possessions. That is a huge advantage. Many of the synthetic rubber roofs (EPDM) fall into this category. You also find the CSPE, CR, and ECR compounds/membranes in this group. These membranes are fairly thick and often you will find them in thicknesses between 30 and 60 mils. These roofing materials offer superior performance over a wide range of exposures. If applied according to manufacturers recommendations, they will give you leak free performance for many, many years.
>
> Thermoplastic Membranes
>
> These membranes are very similar to the Thermosets but there is no chemical cross-linking or vulcanization. Seams in the materials are welded together with solvents or heat. The welds - when done properly - are as strong as the material.
>
> PVC plastic materials are part of this group as well as the following materials: CPA, CPE, EIP, NBP, PIB, and TPO. These are "code" acronyms you might hear the roofer talk about. Be sure to ask exactly what type of material you are getting so you can see which group it falls into!
>
> Modified Bitumen Membranes
>
> These membranes combine asphalt with modifiers and reinforcement materials. They are often a "sandwiched" roofing material. These materials can perform well in my opinion but they are not as advanced as the other two groups. These materials are often referred to as "torch-down" roofs because a large flame throwing torch melts the asphalt so that seams can be joined together. You might hear your roofer mention the names APP or SBS when referring to this membrane.
>
No comments:
Post a Comment