The connections are clean. Yea, the switches are new. Don't think there is a problem there.
Thanks,
Kevin
On Tue, Feb 5, 2013 at 8:24 AM, n61cm <jim@tazwade.com> wrote:
It must be something between the switch and where you have jumpered.
Did you test the switch resistance to make sure they are working? I doubt if new switches are bad...
Maybe the connector(s) have crud in them?
Jim
--- In diesel_mercedes@yahoogroups.com, Kevin Seuferer wrote:
>
> My other problem with my 85 300D is the windows.
>
> I have jumpered from the battery to the connections in the center console.
> All 4 windows will roll up and down by applying 12 volts from the battery
> directly to the wires in the center console. I have replaced both sets of
> window switches with BRAND NEW switches. When I turn the key on, I get 12
> volts on the front terminal of the front window switches. Yet, I cannot
> make the windows go up and down with the switches. All of the fuses are
> brand new.
>
> Grounding problem possibly?
>
> Any suggestions would be helpful.
>
> Thanks,
> Kevin
>
__._,_.___
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (3) |
.
__,_._,___
No comments:
Post a Comment