Hi Mark...it was about 18F this morning...and all the way up to about a whopping 23F now. Need to start the car in about an hour. She's doing great at starting, just rough while cold and takes long to warm up ... so, valve adjustment? ;)
Speaking of finny diesels, this one in Pagosa ain't near as pretty...BUT...even though I am a total n00b, I already have the diesel disease...
http://albuquerque.craigslist.org/cto/2729428585.html
Good thing I have NO cash right now, or I'd probably be in for trouble with SWMBO....
Stay warm...
Caitlin, Santa Fe
--- In diesel_mercedes@yahoogroups.com, "Mark in Lakewood, CO" <beeser750@...> wrote:
>
> What was the morning temperature down there this morning? It was +5 degrees F up here. No going out to visit finny diesels in Julesburg for me today....
>
>
> It sounds like you've pretty much got it down. Each car is a little different. Keep fine tuning your procedure (AND get the valves adjusted), and you'll be starting at temperatures where many gassers fail.
>
>
> BTW, the cam lobe should be facing up (12 o'clock position), and the feeler guage goes between the bottom of the lobe (6 o'clock position) and the cam follower (aka "rocker arm"). Yeah, it'll be an "AHA!" moment once you get the cam cover off and see what's in there.
>
>
> Mark in Lakewood, CO
> ----- Original Message -----
> From: "CaitlinDean" <tinymachine@...>
> To: "diesel mercedes" <diesel_mercedes@yahoogroups.com>
> Sent: Monday, December 5, 2011 10:03:27 AM
> Subject: [diesel_mercedes] Re: Cold Startin'...glow plug relay "clunk"
>
>
>
>
>
>
> Alrighty...the fine tuning continues!
>
> What I have been doing is 3 full cycles, then glowing again only until the light goes off and cranking with full pedal until all cylinders fire (fairly quickly I *think*) then backing off throttle until JUST enough fuel for a purr until warmed up. No revving results, and hopefully my plugs have stayed hot.
>
> NOW...I'll try what you say below...one full cycle, plus the light cycle, then 1/2 throttle.
>
> I don't want to be wearing and tearing more than I have to!
>
> Thanks, Nate!
> Caitlin
> Santa Fe
>
No comments:
Post a Comment