Here are crush washers on eBay.
Scroll down for more pricing information. Bill in Oregon
http://www.ebay.com/sch/i.html?_from=R40&_sacat=0&_nkw=300+Mercedes+injector+crush+washers&_sop=15
==============================
From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com]
Sent: Wednesday, August 3, 2016 8:49 PM
To: diesel_mercedes@yahoogroups.com
Subject: Re: [diesel_mercedes] IP Tinker
Yeah I did. They were only grayish and no noticeable chunks, but it worked better after some polishing and ether. There was dark rings that I never got to come completely clean. but I didn't think scraping was a good idea. Could I have scotch-brighted them? Also, while it worked, It never really worked properly. My little test pipe showed a weak spray at idle that then looked good at wot. So I got one from another IP. But this all proved that the cause was the valve. It still POP-POP-POPs every once in a while so a thorough cleaning is probably in order. But when it runs good (most of the time) it really runs pretty damn good.
Are those check valves and seats matched sets? Or can I just throw them all in the solvent and put them back together in any order? And where can I get new crush washers to put under them upon reassembly? I didn't know the crush washers were there and there may be some missing.
Thanks again for the suggestion.
Bogy
"Hardware eventually fails. Software eventually works" - Michael Hartung
Posted by: <corvallis@peoplepc.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (8) |
No comments:
Post a Comment