| If you have a floor jack then do the motor mounts yourself. Just my suggestion. But it takes an 8 mm allen(hex)head on a socket, and a 12 or 13 or 14 (I don't remember which). Loosen the allen screw from underneath and loosen the two bolts/nuts that hold the m/m onto the frame. Then jack up the engine with a piece of wood to cushion between the jack and the pan. Just a half inch is enough. Slide out the old and slide in the new. There is a piece of tin you may want to reinstall so remember it's orientation. Both sides can be done in 20 minutes. Wear gloves. Bogy.
|
__._,_.___
.
__,_._,___
No comments:
Post a Comment