yeah, it does a good job of de-watering.
from 25 gallons of WMO, that had gone straight to sealed containers, and sat
to settle for a year, and, I drew from a few inches off the bottom of the
barrel, so any water would stay, it still got about 1 oz of water.
----- Original Message -----
From: "Nate Rector" <tccservice111@yahoo.com>
To: <diesel_mercedes@yahoogroups.com>
Sent: Friday, June 17, 2011 11:46 AM
Subject: Re: [diesel_mercedes] cleaning wmo.
I know one guy with wvo uses baking soda to lower acid content.Your machine
would easly spin the water out of oil.
--- On Fri, 6/17/11, ygmir111 <ygmir111@att.net> wrote:
From: ygmir111 <ygmir111@att.net>
Subject: Re: [diesel_mercedes] cleaning wmo.
To: diesel_mercedes@yahoogroups.com
Date: Friday, June 17, 2011, 1:43 PM
I'll be interested in your result, Nate. Thanks.
since I dilute my WMO, and the centrifuge is taking it to less than 1 micron
(according to the owner/engineer of the company), I'm thinking acid and
abrasives are not much of an issue.
Henry
----- Original Message -----
From: "oldsinner111" <tccservice111@yahoo.com>
To: <diesel_mercedes@yahoogroups.com>
Sent: Friday, June 17, 2011 11:40 AM
Subject: [diesel_mercedes] cleaning wmo.
I know with high acid wvo,you water wash it maybe 2 times.Your oil looks
almost new,and acid gone.
I use to work around boats and ships.At sea they would circulate the old
oil; to a steamer to clean it.Looked like new oil.So steam is really water.I
will try washing the wmo to see if the black carbon comes out.Also with
detergent and bleach.
I will do this on a small scale.
No comments:
Post a Comment