[diesel_mercedes] Tip, Tools, and a Joke from Newman Tools

 

this place stocks all those hard to find machine tools, i buy my NON CHINESE BSF taps and dies here....

-nate
On Wednesday, June 28, 2017 6:33 AM, Newman Tools Inc <what_is_new@newmantools.com> wrote:


Just a reminder that you're receiving this email because you have expressed an interest in Newman Tools Inc. Don't forget to add tools@newmantools.com to your address book so we'll be sure to land in your inbox!
 
You may unsubscribe if you no longer wish to receive our emails.

June 2017

Tip of the Month.......

Selecting the Right Plug Gage for the Job

When using plug gages for GO / NO-GO inspection, the GO member should fit into the work piece to indicate to the operator that the component meets the correct specifications.

 For this reason the GO gage is usually selected close, but above the lower limit size of the component.

The NO-GO member should not fit into the work piece.

 If it does, this indicates to the operator that the component has been machined incorrectly and is out of specification.

The NO-GO gage is usually selected just under the high limit of the component, so as to stay within the part's upper and lower tolerance.

Application Example: To check the center hole in the component for later mounting to center arbor for grinding.

Attribute to Check: Center hole bore diameter.

Center Hole Specification Limits: 0.235" to 0.245"

The GO / NO-GO gage is a quick, easy way to verify if this center hole is bigger than 0.235" yet smaller than 0.245".

No Go Pin Gages



The component has a size specification callout of 0.235" to 0.245".

 The GO gage in this example should be selected as a 0.235" plus gage pin and the proper no-go pin gage must be selected as a 0.245" minus plug gage.

No Go Pin Gages


For More Information please contact Newman Tools: 1-800-465-1384 or sales@newmantools.com 



 
 
 
 
Featured Product Of the Month
Miracle Point® Magnetic Protractors / Centering Heads  
miracle point
Miracle Point
 
This accurate protractor has an extremely sensitive, balanced needle which gives immediate reading of angles for 360 degree radius.

The V base exerts a powerful magnetic pull to most any shape/form. The V base is precision milled and the center pin will show the middle point.

Features
* Miracle Point ® series 900 Magnetic base protractor also known as centering head, or pipe centering tool.

* It's the fastest, and one of the most accurate ways to mark the center of round, square, hex, most any shape that fits into the v leg

* Used to locate the middle point of any object positioned within the V leg

* The center pin will mark the middle point at the angle being indicated.

* Great for metal fabrication, plumbing, welding, set up, drills, mills, lathes, benders and general leveling needs

* Made in USA

Used by

Tool-room and Machine Shops

 * Determining angles on shapers, milling machines, grinders, etc.
* Quickly finds center of square or round stock.
* All angle finding operation in your shop.

Welding Shops
 
* Indispensable in quickly and accurately determining angles.

Construction and Maintenance

* Locate plumb and centerline.

Auto and Truck Stops

 * Checks drive line angles and many other uses.

Please click here: Miracle Point® Magnetic Protractors / Centering Heads






   

Speed Taps
Speed Taps

They work in an impact wrench.


Speedtaps have been engineered with changes to the heat treatment compared to most hand taps allowing them to take the impact from an impact wrench increasing productivity 14 to 1 over tapping by hand.


Learn More 




 
HX82M Hex Shank Magnetic Car Reamers
HX82M Hex Shank Magnetic Car Reamers

2 Embedded magnets to secure reamer in socket for added safety
For use in electric and pneumatic impact wrenches
 
* Left Hand Spiral Flute  
* Right Hand Cut
* HSS


Please contact Newman Tools for more information

Learn More  



 

time saver lapping compound yellow 
Time Saver Lapping Compound
PRECISION FINISH ON BEARING SURFACES GUARANTEED NOT TO IMBED  -   WILL NOT CONTINUE TO CUT!
First acts as an abrasive, then the particles diminish to a polish, and finally to inert material.

Learn More 


Joke of the Month: 

I do not know how many women would agree with this...
It can always be seen as a "hint" to men.
A store that SELLS new husbands has just opened in New York City where a woman may go to choose a husband. Among the instructions at the entrance is a description how the store operates.

1. You may enter the store ONLY ONCE

2. There is a catch:  you may choose any man from a specific floor OR you may choose to go up a floor.

3. But you cannot go down except  to exit the building.

So a woman goes to the Husband Store to find a husband.

On the first floor the sign on the door reads:  Floor 1 These men have jobs.

On the second floor the sign reads:  Floor 2 - these men have jobs and love children 

On the third floor the signs reads:  Floor 3 - these men have jobs, love kids, and are extremely good looking.

"Wow" thinks the impressed woman but feels the desire to keep going up.  
On the fourth floor - these men have jobs, love kids, are drop-dead good -looking and help with homework.

The woman cannot take it anymore so she goes up to the next floor.

On the fifth floor the sign says:  these men have jobs, love children, are drop-dead gorgeous, help with homework and are very romantic.

Temptation gets to the woman and she proceeds to the last floor.

Floor six the sign reads:  You are visitor 65,329,0729 to this floor. There are no men on this floor. This floor exists solely as proof that women are impossible to please.  

Thank you for shopping at the Husband Store! 


Do you have a good, clean joke to share with us? If so please email it to us: jokes@newmantools.com
If we choose to print your joke in one of our newsletters,  you will receive a Newman Tools Swiss Army knife.

 
 
 
 
Newman Tools Inc, 185 Iber Rd, Ottawa, Ontario K2S 1E7 Canada
SafeUnsubscribe™ vwnate1@yahoo.com
Forward this email | Update Profile | About our service provider
Sent by what_is_new@newmantools.com in collaboration with
Constant Contact


__._,_.___
Posted by: Nate <vwnate1@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (1)
Have you tried the highest rated email app?
With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app on the market. What are you waiting for? Now you can access all your inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email again with 1000GB of free cloud storage.

.

__,_._,___

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)