You're most welcome Rob ! I owe you big time .
-Nate
Rob wrote :
Thanks Nate.
Rob
=
Rob
=
On 2/20/16 5:32 PM, vwnate1@... [diesel_mercedes] wrote:
O.K. ;
Rob asked me how the heck to access the 13MM ATF nuts holding the driver side sway bar bushing clamp ~ pic. # 1 shows the 13MM 3/8" drive socket on a knuckle and long extension ,
Pic. # 2 shows me reaching one of the nuts on the bottom of the brake booster from under the hood .
Pic. # 3 shows how I reached the other 13MM ATF nut from underneath the left fender after removing the wheel and the delicate cute little , very important white (when new) plastic cover .
To access the upper two nuts I had to disconnect some wires and move them out of the way .
All in all this isn't a terribly difficult job , just lots and lots of mindless labor plus turning nuts one or two flats , re position the wrench , turn it one more flat , re position the wrench.... this sort of work will drive you bonkers but patience is king here .
I have a whole slew of photos I took doing this job , they're blurry and poorly lighted but once you're working on it , they'll make perfect sense .
After you struggle this one clamp off , the rest of the job is pretty straight forward .
Sorry I don't know how to make PDF files .
-Nate
__._,_.___
Posted by: vwnate1@yahoo.com
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (21) |
.
__,_._,___
No comments:
Post a Comment