These indicators are only on so long as there is a problem. There's no resetting them.
The "Brake Lining" wear indicator is probably more associated with worn front pads than the rear brakes. And make sure ALL of the brake, front and rear parking and turn signal lamps are working. Could be you have some dirty contacts in the lamp sockets, or a bad ground, as Nate suggested.
Mark in Lakewood, CO
From: "guy" <gjs83633001@yahoo.com>
To: "diesel mercedes" <diesel_mercedes@yahoogroups.com>
Sent: Monday, September 17, 2012 8:06:22 AM
Subject: [diesel_mercedes] Dash board messages
From: "guy" <gjs83633001@yahoo.com>
To: "diesel mercedes" <diesel_mercedes@yahoogroups.com>
Sent: Monday, September 17, 2012 8:06:22 AM
Subject: [diesel_mercedes] Dash board messages
I have a 1999 Mercedes Benz 300TD I have several message lights that come on when I start the car. One is LAMP DEFECTIVE and another is BRAKE LINING WEAR. I replaced 2 burned out bulbs and the rear brake lining but the lights still come on. How do I shut off the message lights?
__._,_.___
.
__,_._,___
No comments:
Post a Comment