HI Chuck.
dang, directly, I don't know, but am sure.
Logic would say, once warm, it should pump water out of the top radiator
hose.....or, the out to the heater core, should have good pressure.
I'd also submit taking the thermostat out, will make it run too hot.
They are made to use it, to the engines advantage, something regarding the
water not going through the radiator so fast it can't cool.
but, you will find several opinions regarding thermostats.
Good luck
Henry
----- Original Message -----
From: "c24052000" <jcrcpa@tx.rr.com>
To: <diesel_mercedes@yahoogroups.com>
Sent: Saturday, July 07, 2012 10:26 AM
Subject: [diesel_mercedes] Re: water pump w126
Thanks Henry, the car is overheating. The thermostat is removed, is there a
way to check and see if the water pump is working?
Chuck
--- In diesel_mercedes@yahoogroups.com, "ygmir111" <ygmir111@...> wrote:
>
> is the car overheating?
> also, the water sitting in the block, should achieve a 'static level'
> where
> it sits, and is full.
> IIRC ,you'll not see the water circulating, until the thermostat opens.
>
>
> good luck
> Henry
>
>
> ----- Original Message -----
> From: "c24052000" <jcrcpa@...>
> To: <diesel_mercedes@yahoogroups.com>
> Sent: Saturday, July 07, 2012 10:05 AM
> Subject: [diesel_mercedes] water pump w126
>
>
> How do i check the water pump on an 84 300sdd? I started car took off
> top
> radiatorhose and the water just stayed there. I would expect it to go down
> as ir recycled to engine?
> Chuck
>
No comments:
Post a Comment