You have a row of horizontal HVAC buttons , correct ? .
Push the ' EC ' one , that's # 4 going right , then push the top fan button , after the engine runs a few minutes the fan should come on loudly and you'll get a serious blast of hot air from the dash vents as it blows out the accumulated heat , some dust too .
If this works , *gently* press the middle , translucent fan button to make the vent fan moderate it's speeds depending on the inside temperature .
If nothing happens , try depressing the ' DEF ' button ~ this will force the defroster on full tilt (default) & blast you with heat too , just do this as a last gasp test thing if nothing else works .
The flax discs go at each end of the drive shaft where U-Joints go on your truck .
Yes , they can be improperly assembled by the DPO (who , BTW , needs a serious beating and his pants & boots confiscated & BURNED) .
Best thing is to drive the car to a shop with a hoist and have it put up as far as it'll go so you can walk 'round underneath it with a flashlight and note pad .
-Nate
Trish wrote:
>
> On a/c...OH. So I might have a/c huh? COOL in more ways than one! I
> haven't even tried it. I'll check it out later...too hot out now.
>
> Where do the flex discs go? I'm being lazy here I could look it up. It's
> not going to be fixed this weekend. Is it dangerous or just a nuisance?
>
> Yeah the DPO did work on them..so who knows how much he messed them up. Not
> a priority, it goes down and up..sometimes I have to urge it either way,
> but it works which is good enough for me, for now.
>
> Thanks!
>
>
No comments:
Post a Comment