The plastic stud thing has a pin in the center of it , kinda tricky to pull out , once you do , the expanded part you cannot see , collapses and make it fairly easy to work out by wiggling .
DO NOT loose the pin ! .
I'd not fool with the vacuum resivoir until testing it by applying vacuum to the solid yellow plastic pipe underneath the right front floor mat .
It , as well as any other yellow pipe you test there (there's a bunch in 'Y' connectors) should hold 15" of vacuum for more than 10 minutes .
FWIW , if every thing is *perfect* it'll hold 20" of vacuum for about a WEEK .
-Nate
Stan wrote:
>
> How do you remove the vacuum reservoir from under the rear glass? It
> appears to be held in place by a stud with a washer on it but it is not
> a screw head.
> --
> Stan George Portland <<
>
No comments:
Post a Comment