Re: [diesel_mercedes] Auto transmission hanging up.

You must remove at least three bolts from the flex disc, and then pry it
apart. It will NOT slide out of the tailshaft, it's bolted in.
Jeff
----- Original Message -----
From: "Lawrence Rhodes" <primobassoon@sbcglobal.net>
To: <diesel_mercedes@yahoogroups.com>
Sent: Thursday, January 24, 2008 3:13 PM
Subject: [diesel_mercedes] Auto transmission hanging up.

>I lowered the transmission after taking off the back support. The drive
> shaft isn't comming out & the whole thing just hangs there. I jacked it
> up
> a bit to support it. At this point shouldn't the drive shaft just fall
> down. I see copper inserts in the bolt holes for the drive shaft
> connector
> to the transmission. Lawrence Rhodes.....
>
>
>
>
> Yahoo! Groups Links
>
>
>

Yahoo! Groups Links

<*> To visit your group on the web, go to:

http://groups.yahoo.com/group/diesel_mercedes/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:

http://groups.yahoo.com/group/diesel_mercedes/join

(Yahoo! ID required)

<*> To change settings via email:
mailto:diesel_mercedes-digest@yahoogroups.com
mailto:diesel_mercedes-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
diesel_mercedes-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:

http://docs.yahoo.com/info/terms/