Not being an owner I thought I'd Google up this problem. Seems unreasonable that MB would have allowed this problem to go on for so long. The link shows the replacement. Comment about using the proper MB buffers with correct shore rating for the rubber and making sure the heat protection cups are fitted is good. The underside isn't shown but if it is open, a suitably shaped piece of steel rod underneath at the rear welded in might work. A short piece on the outside around the mount also probably good. 3/16" rod stiff enough. The filter housing itself is cantilevered out on quite a long arm so adding any weight at the end is not a good idea. It's all down to vibration v resonance.
I suspect that there will be some owners who will say that they have never had the problem. What's their story?
Derek UK
__._,_.___
Posted by: derek scott <delukxx@gmail.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (2) |
.
__,_._,___
