Diesel RVs: 09/28/17

Re: [diesel_mercedes] my summer vacation

Max,

I'm sure your brakes will either be fine, or we'll hear about it.

I didn't get enough tomatoes to make salsa this year. though I'm enjoying Mangoes.

Sorry to hear about your mom, as well as your dog.

Rob

On 9/28/17 4:55 PM, jasperezra@gmail.com [diesel_mercedes] wrote:

Finally got back to my brake job on the front of my 240 4spd. Its in the garage. A simple system that is extremely difficult and very frustrating to work on. Since I started this job life has gotten in the way of finishing this up. Its been so long I cant remember what happened first. After I tore the front brakes off the car I realized it was gonna be a trip getting it all back together. About this time I realized my number 2 car(the 240 auto) was making a screeching sound out of one of the rear wheels. I checked it out and , yep the brakes were shot. Then it was time for me and my son to make our trip to Denali for a week. So I had to get out my winter car(Subaru) to drive to the airport. We had a amazing time in Alaska. I tried to post pictures twice, but did not work. When we got back I started on the rear brakes on the no.2- 240, then I got a call my mom was dying, so the next day I flew to Sacramento. My mom passed after a pretty good very long life. I know later that will mean something. Got back home and worked on the rear brakes on number 2. Of course I tried to stick pads on it but the pistons were froze up. Did I try and rebuild the calipers, hell no. Ordered rebuilds and had problems. First thing was they did not show up when they were supposed to, bummer because its a 50 mile drive to town and back. Then I finally got them and one was defective (did not notice till I was putting it on the car) then the pads I ordered were too fat and did not work. O goody a extra trip to town. Meanwhile I have to be mowing the lawn and taking care of my garden. So far I have picked 170lbs of tomatoes and canned 15 gallons of sauce and made about 50 pints of salsa. Harvested about 30lbs of garlic, just planted next years crop yesterday. Also got my woodshed full. My dog died earlier this year, I am dogless for the first time in my life.

I had a very hard time cleaning cleaning the bore on one side so I broke it in half. Good choice, I hope. I could not find new o rings, but the old ones look good. Today I re-assembled one and there is no way I could do this with the caliper whole. The pistons are very difficult to get back in even when broke in half. It was so long I forgot what the heat shields looked like so I popped a caliper off my other car to remind me. So I got one caliper back together. If they dont work then I learned something. I will spend the money in the future and buy re-builds. Max

__._,_.___

Posted by: Aleph93 <aleph93@ca.rr.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (2)

Have you tried the highest rated email app?

With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app on the market. What are you waiting for? Now you can access all your inboxes (Gmail, Outlook, AOL and more) in one place. Never delete an email again with 1000GB of free cloud storage.

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

[diesel_mercedes] my summer vacation

Finally got back to my brake job on the front of my 240 4spd. Its in the garage. A simple system that is extremely difficult and very frustrating to work on. Since I started this job life has gotten in the way of finishing this up. Its been so long I cant remember what happened first. After I tore the front brakes off the car I realized it was gonna be a trip getting it all back together. About this time I realized my number 2 car(the 240 auto) was making a screeching sound out of one of the rear wheels. I checked it out and , yep the brakes were shot. Then it was time for me and my son to make our trip to Denali for a week. So I had to get out my winter car(Subaru) to drive to the airport. We had a amazing time in Alaska. I tried to post pictures twice, but did not work. When we got back I started on the rear brakes on the no.2- 240, then I got a call my mom was dying, so the next day I flew to Sacramento. My mom passed after a pretty good very long life. I know later that will mean something. Got back home and worked on the rear brakes on number 2. Of course I tried to stick pads on it but the pistons were froze up. Did I try and rebuild the calipers, hell no. Ordered rebuilds and had problems. First thing was they did not show up when they were supposed to, bummer because its a 50 mile drive to town and back. Then I finally got them and one was defective (did not notice till I was putting it on the car) then the pads I ordered were too fat and did not work. O goody a extra trip to town. Meanwhile I have to be mowing the lawn and taking care of my garden. So far I have picked 170lbs of tomatoes and canned 15 gallons of sauce and made about 50 pints of salsa. Harvested about 30lbs of garlic, just planted next years crop yesterday. Also got my woodshed full. My dog died earlier this year, I am dogless for the first time in my life.

I had a very hard time cleaning cleaning the bore on one side so I broke it in half. Good choice, I hope. I could not find new o rings, but the old ones look good. Today I re-assembled one and there is no way I could do this with the caliper whole. The pistons are very difficult to get back in even when broke in half. It was so long I forgot what the heat shields looked like so I popped a caliper off my other car to remind me. So I got one caliper back together. If they dont work then I learned something. I will spend the money in the future and buy re-builds. Max

__._,_.___

Posted by: jasperezra@gmail.com

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (1)

Have you tried the highest rated email app?

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

Re: [diesel_mercedes] Slight Progress

Nate,

Glad to hear you're walking/ driving.

Rob

On 9/28/17 11:38 AM, Nate vwnate1@yahoo.com [diesel_mercedes] wrote:

Monday one Surgeon told me I'm on the schedule for my next surgery, I can hardly wait to get this metal out of my hand/arm .

Tuesday I was allowed to remove the leg brace and begin walking with my walker so I drove to the filling station to tank up and discovered 1/2 pint low on ATF (fairly easy) and both micronic fuel filters dirty, that wasn't fun to change but I managed .

Then off to the car wash as it was filthy . looks a bit better now, I'd polished and waxed it a couple days before crashing my Moyo on 6.26, dammit .

This walker thing is really slow and I hate it although I *do* like walking .

-Nate

Virus-free. www.avg.com

__._,_.___

Posted by: Aleph93 <aleph93@ca.rr.com>

Reply via web post

•

Reply to sender

•

Reply to group

•

Start a New Topic

•

Messages in this topic (2)

Check out the automatic photo album with 3 photo(s) from this topic.

Have you tried the highest rated email app?

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___

[diesel_mercedes] Slight Progress [3 Attachments]

[Attachment(s) from Nate included below]

Monday one Surgeon told me I'm on the schedule for my next surgery, I can hardly wait to get this metal out of my hand/arm .

Tuesday I was allowed to remove the leg brace and begin walking with my walker so I drove to the filling station to tank up and discovered 1/2 pint low on ATF (fairly easy) and both micronic fuel filters dirty, that wasn't fun to change but I managed .

Then off to the car wash as it was filthy . looks a bit better now, I'd polished and waxed it a couple days before crashing my Moyo on 6.26, dammit .

This walker thing is really slow and I hate it although I *do* like walking .

-Nate

Virus-free. www.avg.com

__._,_.___

Attachment(s) from Nate | View attachments on the web

3 of 3 Photo(s)