Thanx Bogy ;
I'll do just that ~ I *thought* I'd looked for such a bracket but must have missed it .
Centered or to one side ? .
-Nate
Bogy wrote :
look "underneath" the oil pan behind the big sump. there is a bracket that has a slip connection to the cross member under the engine. It will keep the engine from lifting up. I just faced this myself pulling a motor out of a 240d to put in my jeep to replace the tired 5 banger I first put in it. Good luck
Bogy.
"Hardware eventually fails. Software eventually works" - Michael Hartung
From: "vwnate1@... [diesel_mercedes]" <diesel_mercedes@yahoogroups.com>
To: diesel_mercedes@yahoogroups.com
Sent: Sunday, January 24, 2016 7:04 PM
Subject: [diesel_mercedes] Oil Cooler Hoses -HELP- !
1984 300TD .
I was able to sneak out the lower hose but the top one won't come out for clearance issues so I unbolted the lower motor mount 100MM Allen head bolts , undid the four 17MM ATF nuts on the left side support and removed the tiny engine shock absorbers , tried to jack the engine up so I could remove the left side cast alloy support but there's -no- gap between the support and the motor mount (?!?) .
WTH ? .
I can't see what's holding the engine from raising up , I'm sure some one here will know what I've forgotten to undo ......
TIA ,
-Nate
__._,_.___
Posted by: vwnate1@yahoo.com
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (6) |
.
__,_._,___
No comments:
Post a Comment