This may be a better way to view this email via the web site. Bill in
https://groups.yahoo.com/neo/groups/diesel_mercedes/conversations/messages/67518
From: diesel_mercedes@yahoogroups.com [mailto:diesel_mercedes@yahoogroups.com]
Sent: Sunday, November 29, 2015 6:48 PM
To: diesel_mercedes@yahoogroups.com
Subject: [diesel_mercedes] w110 200d rear axle removal [6 Attachments]
We are trying to remove the rear axle to get the rear outer bearings. We have used a slide hammer and a tool we made that mounts on the wheel and have been pulling pretty hard but can't get anything to move. All the pictures and diagrams I have looked at show no C-Clip on the end of the axle in the differential that we have to remove, and the differential doesn't split in half to easily get inside. There is a big whole that seems to be an access hole to remove these nuts that supposedly holds in a plate, and that plate holds in the axle instead. We took all those off but no luck. I took some pictures, and the one on the back of the wheel there seems to be a bolt or nut that I highlighted and I am thinking that might be holding it in. Any ideas?
Posted by: <corvallis@peoplepc.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (2) |
No comments:
Post a Comment