[Attachment(s) from Dexter Barney dexterbarney437@yahoo.com [diesel_mercedes] included below] 
We are trying to remove the rear axle to get the rear outer bearings. We have used a slide hammer and a tool we made that mounts on the wheel and have been pulling pretty hard but can't get anything to move. All the pictures and diagrams I have looked at show no C-Clip on the end of the axle in the differential that we have to remove, and the differential doesn't split in half to easily get inside. There is a big whole that seems to be an access hole to remove these nuts that supposedly holds in a plate, and that plate holds in the axle instead. We took all those off but no luck. I took some pictures, and the one on the back of the wheel there seems to be a bolt or nut that I highlighted and I am thinking that might be holding it in. Any ideas?
__._,_.___
Attachment(s) from Dexter Barney dexterbarney437@yahoo.com [diesel_mercedes] | View attachments on the web
6 of 6 Photo(s)
Posted by: Dexter Barney <dexterbarney437@yahoo.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (1) |
.
__,_._,___
No comments:
Post a Comment