My tranny went out a bit earlier 180k, so I replaced it with good used one which works yet needs a rebuild. I have a different tranny used only on 85 CA cars, now with 205k.
For protecting hoses, zip strip pieces of cut hose on to the hose you want protected. Knee pads....
Rob Garden Grove.
Sent on a Samsung Galaxy S®4
1b. Re: How long does automatic trans ____________________________________
2a. Re: High pressure hose for self leveling TD system.
Posted by: "Lawrence Rhodes" primobassoon@sbcglobal.net looksee007
Date: Sun Jan 25, 2015 9:12 am ((PST))
As soon as I took out the old high pressure line I got a little surprise. The new line had the right connectors but the wrong length. So I used it anyway and rerouted the line not around the hydraulic canister/fluid holder . I used some of the old holders. However all the rubber protectors are gone or shredded. Can a tight hold on metal using zip ties reduce the abrasion of high or low pressure hoses? No squirting hose so check valve working. The banjo bolt is 17mm with two washers and the rear size is 12mm. Hose has 3/4"/19mm end nut. 30 minute job for sure....except for the dirt. Lawrence Rhodes
Messages in this topic (8)
________________________________________________________________________
________________________________________________________________________
3a. Timing Chain Press
Posted by: vwnate1@yahoo.com vwnate1
Date: Sun Jan 25, 2015 4:43 pm ((PST))
IIRC , there's a tool rental section at Pelican Parts Forums .
-Nate
Mike wrote :
Hello, Newbee here. I am preparing to replace the timing chain on my 1985 300td. I live near Richmond Virginia and am wandering ...are there any list members out there in VA or NC with a chain press for the OM617 that I may borrow or rent? If so, p-mail me at mg.carney@... mailto:mg.carney@...
Thanks, Mike
Messages in this topic (3)
------------------------------------------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/diesel_mercedes/
<*> Your email settings:
Digest Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/diesel_mercedes/join
(Yahoo! ID required)
<*> To change settings via email:
diesel_mercedes-normal@yahoogroups.com
diesel_mercedes-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
diesel_mercedes-unsubscribe@yahoogroups.com
<*> Your use of Yahoo Groups is subject to:
https://info.yahoo.com/legal/us/yahoo/utos/terms/
------------------------------------------------------------------------
__._,_.___
Posted by: aleph93 <aleph93@ca.rr.com>
| Reply via web post | • | Reply to sender | • | Reply to group | • | Start a New Topic | • | Messages in this topic (1) |
.
__,_._,___
No comments:
Post a Comment