Just to say, check your fuses first. The highs and lows and side to side run off different fuses, and one could be goosey.
brian from la verne, ca
From: Alan Boucher <alstheone@verizon.net>
To: diesel_mercedes@yahoogroups.com
Sent: Monday, November 21, 2011 12:41 PM
Subject: [diesel_mercedes] Interesting headlight problem
My 300D seemed to have one headlight out. This is a euro conversion
with replaceable bulbs. Its been running with these lights for about 3
years. I checked the bulb - both filaments ok. I turned on the
Headlights - low beam with driving light switch in off position. The
lights are lit somewhat dimly and the voltage on the low beam side of
the headlight socket reads about 3 volts and that filament glows
dimly. On high beams I have 12 volts and a bright bulb with the driving
lights off. I'm thinking its the switch but haven't had time to check
further. Does anyone have a confirmation or other suggestion?
Al Boucher
with replaceable bulbs. Its been running with these lights for about 3
years. I checked the bulb - both filaments ok. I turned on the
Headlights - low beam with driving light switch in off position. The
lights are lit somewhat dimly and the voltage on the low beam side of
the headlight socket reads about 3 volts and that filament glows
dimly. On high beams I have 12 volts and a bright bulb with the driving
lights off. I'm thinking its the switch but haven't had time to check
further. Does anyone have a confirmation or other suggestion?
Al Boucher
__._,_.___
MARKETPLACE
.
__,_._,___
No comments:
Post a Comment