--- In diesel_mercedes@yahoogroups.com, "Lost but making good time." <aldridgetony97@...> wrote:
>
> There is a little button on top of the brake fluid chamber, you need to push it down to allow the fluid for the rear brakes to enter that part of the system. Just fill (overfill) the brake fluid chamber, then push the button down, repeat until the rear brake chamber is up to level.
> Then bleed as normal, I used a vacuum pump (mity vac) to bleed mine & pulled out some foul looking junk.
>
> --- In diesel_mercedes@yahoogroups.com, "m124300d" <ekautz@> wrote:
> >
> > I am having trouble bleeding the breaks on my 1987 300D.
> > I replaced the rear calipers on the car tried to bleed the breaks
> > and get nothing (no break fluid to come to the tear breaks).This
> > car has ABS Thanks for any help Gene
> >
> Well I finely fixed my break bleeding problem. It wound up being
the (new) master cyl that I installed it was bad changed it out
with a new one and presto the break bleeding went just fine.
Thanks for the Help Gene
No comments:
Post a Comment