[diesel_mercedes] ATF leak around modulator, fixable?

 

Hey everyone,

After replacing the tranny modulator, I still have an external ATF leak from around the modulator. The old modulator was leaking internally too, and sending ATF into the vacuum lines, which has stopped with the new modualtor.

Today, I pressure washed the underside, and crawled under to check where the ATF leak was, and it was obvious.

Does anyone know if a leak at the tranny modulator can be fixed without dropping the tranny? My tranny is still under warranty, yet I'd rather not have to take it out, and return it to the re-builder, in another county, unless I have to.

Thanks

Rob in GG

'85 300D CA, w/ 722.416


On 1/5/20 2:48 PM, Aleph93 aleph93@ca.rr.com [diesel_mercedes] wrote:

OK, I replaced the tranny modulator with the new and improved model, cleared the remaining ATF out the lines, and it shifts really smooth, shuts off, locks work, I like it. I'll test it out more this week.

The new and improved tranny modulators have a knob on the outside, that you can adjust the shift, rather than having to pull the cap and turn the pin.

Driving the truck was fine, yet I'm ready to drive my MB now.

Rob

'85 300D

=

On 11/16/19 1:49 PM, Rob wrote:

Has anyone had ATF in their vacuum lines?

I'm assuming I just need a new tranny modulator, yet just checking in with others to see if it could be more.

The ATF gets sucked up into the vacuum system and rots out the rubber bits. For the short term, I added a small engine fuel filter to the vacuum line, to the tranny today, which should catch the ATF before it heads further in. Hopefully things aren't wrecked in there already.

I also swapped out my climate control module today with another one in the garage, and can enjoy the blower again, with heat and vent. The blower was only coming on, with the Defrost and the left AC buttons.

Rob

'85 300D

_._,_._,_
Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#36) | Reply To Group | Reply To Sender | Mute This Topic | New Topic

Your Subscription | Contact Group Owner | Unsubscribe [aleph93@ca.rr.com]

_._,_._,_

__._,_.___

Posted by: Aleph93 <aleph93@ca.rr.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (2)

.

__,_._,___

Re: [diesel_mercedes] Sad News

 

Yessir ! .

That he did and I'm very glad about it .

-Nate
LIVE in the world as it is, WORK to make the world as it should be


On Thursday, February 6, 2020, 9:37:26 PM PST, Bud <budski252@yahoo.com> wrote:


At least he walked away.


On Feb 4, 2020 10:06 PM, "Nate vwnate1@yahoo.com [diesel_mercedes]" <diesel_mercedes@yahoogroups.com> wrote:
 

  Breaking News

 

Sad news ~ my big brother called me this afternoon, he got T-boned by a woman in a Nissan Rouge (some sort of SUV or crossover thing) when she ran a red light at speed, hitting his 4,000 + 1987 Mercedes 300SLD hard enough to spin it in a circle, it's done for, look at the photos ~ not only is the right rear door and lower body mangled but the upper part of the 'C' pillar now has a shallow dent in it, not from direct impact, from the body being twisted . the right front door is also sprung and out of alignment with the body .

He loves this car in spite of refusing to ever wash it , maybe we'll be able to find another one that needs a good engine....

He's now driving my Coupe, I hope he doesn't get hit in it .

-Nate
LIVE in the world as it is, WORK to make the world as it should be


                      

__._,_.___

Posted by: Nate <vwnate1@yahoo.com>
Reply via web post • Reply to sender • Reply to group • Start a New Topic • Messages in this topic (6)

.

__,_._,___