My 1981 240D standard has been giving ne fits with a stumbling and
stalling problem - as well as what I thought was a brake booster gone
bad. WRONG! At least I now think the problem is a vacuum leak. My
pump puts out about 18 inches of vacuum, which is about right at 4000
feet elevation. I have looked for a couple of years for a vacuum
diagram for my specific car. No luck anywhere. Anyone out there with
help??
I think that I have about 10 inches with everything hooked up. I think
the vacuum goes so low that the fuel shutoff starts to shut down the
engine and it starts to stumble. I have a Mityvac and so can test
stuff. The problem is not knowing where anything goes. There is a
green/yellow (I think) line into the "Tee" off the main line from pump
to the brake booster. I has been broken off and the "Tee plugged. I
really need a vacuum diagram in order to track the leak. Somebody help?
Roland Hyatt
1981 240D stick 210K+
1984 300SD 190K
1980 240D auto 250K)
1983 240D auto inop
1983 300SD inop
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
| Reply via web post | Reply to sender | Reply to group | Start a New Topic | Messages in this topic (1) |
