What a thrill. It is time for my fall oil changes, and other assorted things. First, I categorically want to declare that my LA to Vegas and back to LA trip proved that the axle CV joint replacement on Mary cured her "whang, bang, clang" issue. The new solenoid (and starter) cured the intermittent "click, click" non start issue too.
Today, I park Mary & Martha side by side and change their oil and filters. While underneath Martha, I will take a hard look at her Neutral Safety Switch as we are not starting in Park, only in Neutral with some wiggling involved.
And, here comes the sun - so it must be time to do all this stuff instead of just talking about it.
brian from la verne
[diesel_mercedes] Oil Changes & Stuff
__._,_.___
MARKETPLACE
.
__,_._,___
Re: [diesel_mercedes] Need motor mounts
As a follow up to Rob - if your engine is out, change everything you can (hoses, wiring, mounts, etc.). Life is too short to not take advantage of the engine being out of the car. In other words, what a great opportunity to change, replace, fix, improve, a ton of things without being on your back with oil dripping in your face and your hand hitting a hot muffler.
brian from la verne, ca
From: Aleph93 <aleph93@ca.rr.com>
To: diesel_mercedes@yahoogroups.com
Sent: Wednesday, October 26, 2011 6:55 AM
Subject: Re: [diesel_mercedes] Need motor mounts
There's a few things that are easy to replace when the engine's out,
like the oil cooler lines. They can be replaced while the engine is in,
yet quite a PITA. The the lines go from the oil filter canister to the
oil cooler, by the radiator. Check these lines before installing the
engine, especially the rubber parts for cracks or weeping.
Rob
'85 300D
Garden Grove, CA
==
On 10/26/11 1:03 AM, diesel_mercedes@yahoogroups.com wrote:
> 6a. Need motor mounts
> Posted by: "Trish Dougherty"purrfectharmonyfarm@wifi45.com patricia_dougherty
> Date: Tue Oct 25, 2011 6:10 pm ((PDT))
>
> So can I just get motor mounts at Auto Zone, or is there a special one for
> my 300D?
>
>
like the oil cooler lines. They can be replaced while the engine is in,
yet quite a PITA. The the lines go from the oil filter canister to the
oil cooler, by the radiator. Check these lines before installing the
engine, especially the rubber parts for cracks or weeping.
Rob
'85 300D
Garden Grove, CA
==
On 10/26/11 1:03 AM, diesel_mercedes@yahoogroups.com wrote:
> 6a. Need motor mounts
> Posted by: "Trish Dougherty"purrfectharmonyfarm@wifi45.com patricia_dougherty
> Date: Tue Oct 25, 2011 6:10 pm ((PDT))
>
> So can I just get motor mounts at Auto Zone, or is there a special one for
> my 300D?
>
>
__._,_.___
MARKETPLACE
.
__,_._,___
Subscribe to:
Posts (Atom)