Mine's the rear driver's side door, that doesn't shut as well. I have to
slam it a little bit, whereas the others just shut right.
Nothing obvious I've seen to cause it, though it's not so bad I've spent
too much time checking it.
Thanks Brian, I'll look at that too, sometime...
Rob
'85 300D
Garden Grove, CA
On 2/11/12 2:49 AM, diesel_mercedes@yahoogroups.com wrote:
> 1984 300SD door lock assembly
> Posted by: "300SD 300SDL 78840"rio78840@yahoo.com rio78840
> Date: Fri Feb 10, 2012 10:34 am ((PST))
>
> I am having some problems with my passanger door on my 84 300 SD. It doesn't close all the way if you just push or pull it it has to be slammed hard for it to shut right. There is nothing blocking or opstructing the latch or the door. Any suggestions or advice would be help full I don't know if they can be adjusted or if anyone has one laying around that they don't need.
>
> Del Rio
> 1984 300SD
> 1987 300SDL
Re: 1984 300SD door lock assembly
Posted by: "BStromsoe"bstromsoe@yahoo.com bstromsoe
Date: Fri Feb 10, 2012 10:50 am ((PST))
Check to see if your door seal has bulged or loosened. You can also adjust the lock. There is also a little (1") hard rubber piece that can work its way out.
brian from laverne, ca
Mary (195K) Martha (280K)
1983 w123 300d's
No comments:
Post a Comment